8 |
F T P 1 0 0 I n s t a l l a t i o n a n d O p e r a t i n g I n s t r u c t i o n s R e v . 0 2
Requirements
:
1.
No. 4 Philips head screwdriver.
2.
1 other person cable of lifting 50 lbs.
The Foresight Sports Touch Panel FTP100 uses a standard 200mm x 100mm VESA mounting
pattern using 8mm screws. To install the FTP100 follow the steps outlined below. In this
example the FTP100 is being mounted to a Foresight Sports bay divider but the application is
universal with a VESA approved mount.
Mounting Instructions
:
STEP 1:
Route the provide cables (USB, HDMI, Power) to your mounting location to ensure
proper length and at least 1 ft of slack (Fig. 1).
STEP 2:
Hold the FTP100 near the mount aligning the screw holes to the holes of the mount.
(Fig. 1) Thread the screws into the FTP100, starting with the top 2. (Fig. 2) Tighten to a snug fit
allowing for slight movement needed to align bottom holes. Thread the remaining screws into
the FTP100 to a snug fit as well. At this point make sure the touchscreen is level and to your
liking. Fully tighten all 4 screws well so that the unit may not be shifted.
Fig 1.
Mounting
holes
Mounting
holes
Cable slack
