5
IMPORTANT SAFETY SUMMARY
WARNING
THIS MANUAL SHOULD BE READ THOROUGHLY BY INSTALLATION, SERVICE, OR OPERATING PERSONNEL.
THESE PERSONS SHOULD HAVE A THOROUGH UNDERSTANDING OF ITS OPERATIONAL AND SAFETY
FEATURES BEFORE COMMENCING INSTALLATION, SERVICE OR OPERATION OF THIS PIECE OF
EQUIPMENT. THIS WILL MINIMIZE THE POSSIBILTY OF INJURY TO PERSONNEL OR DAMAGE TO EQUIPMENT
.
CAUTION
ELECTRICAL LOCKOUT DEVICES SHOULD BE USED AT THE POWER SOURCE WHEN PERFORMING SERVICE
ON THE ELECTRICAL SYSTEM
.
When using your appliance, basic precautions should always be followed, including the following:
1. Read all instructions.
2. Use appliance only for its intended use.
3. Burns could occur from touching hot metal parts, hot water, or steam.
4. Before making any electrical connections, disconnect power to the circuits providing power to the machine.
Before doing any electrical service, be sure to protect against grounding. If possible, electrical adjustments
should be made with one hand, with the other free and clear of equipment.
5. The following general safety notices supplement the specific warnings and cautions appearing elsewhere in
the manual. They are recommended precautions that must be understood and applied during operation and
maintenance of the equipment covered herein. Should situations arise that are not covered in this manual, it is
advisable to contact a Forenta Factory Service Technician.
6. Under no circumstance should repair or adjustments of energized equipment be attempted alone. The
immediate presence of someone capable of rendering aid is required
7. The following caution & warning labels are located on the machine, and should be observed and recognized. If
a label is damaged or removed, it should be replaced at once by the plant owner to further alert persons of
any hazards.
Safety Symbols to be Recognized
This warning symbol indicates the presence of hot surfaces that could cause serious burns.
This warning symbol indicates the presence of dangerous voltages.
SAVE THESE INSTRUCTIONS
