9
INSTALLATION INSTRUCTIONS
NOTICE
FAILURE TO FOLLOW THESE INSTRUCTIONS AND THE RECOMMENDED STEAM
PIPING ILLUSTRATION, MAY RESULT IN LESS THAN OPTIMUM QUALITY AND
PRODUCTION AS WELL AS UNECESSARY STEAM LOSS.
WARNING
PRECAUTIONS MUST BE TAKEN WHEN WORKING WITH STEAM SYSTEMS. THE
STEAM SHOULD BE TURNED OFF, THE SYSTEM DRAINED OF STEAM, HOT
WATER AND PRESSURE, AND THE STEAM PIPING COOL BEFORE MAKING ANY
REPAIRS. STEAM IS VERY HOT AND UNDER HIGH PRESSURE. IF CARE IS NOT
TAKEN, IT CAN CAUSE SERIOUS BURNS AND INJURIES TO PERSONNEL.
CAUTION
ALL STEAM LINES SHOULD BE PROPERLY INSULATED TO PROTECT PERSONNEL
AND TO INCREASE OPERATING EFFICIENCY.
NOTICE
STEAM LINE PIPING SHOULD BE BLACK PIPE.
NOTICE
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN MACHINE
MALFUNCTION AND WILL VOID THE MACHINE WARRANTY. THE STEAM SYSTEM
MUST BE FREE OF OIL AND FOREIGN MATERIAL.
Water Spray Supply Connection
The water spray attachment must have water supply from the plants water system. This
should be connected to the “Water Connection” on the water spray hanger mount.
Depending on the condition of your water supply the addition of a water filter might be
advisable.
Test
The machine should now be ready for the steam to be turned on to test the machine’s
functions and controls. As the machine gets hot, check for steam leaks. Any leaks must be
repaired immediately. The plant steam supply should be checked for adequate supply. The
condensate return system and trap should be checked for proper functioning.
