Page 8
PC Adapter Quickstart Guide
In
s
ta
ll
a
ti
on
on
Wi
ndo
w
s
NT
4
.0
Installation on Windows NT 4.0
Use the following procedure to install the adapter drivers for Windows NT 4.0 (if you
need to create installation diskettes, rather than installing from the ForeRunner software
CD, refer to page 18 of this quickstart guide):
1. In the Network Control Panel, select Add Adapter.
2. Select <Other> Requires disk from manufacturer in the Add Adapter dialog box.
3. When the Insert Disk dialog box appears, change the path to specify
d:\win-
dows\winnt
, where D: indicates your CD-ROM drive.
4. Insert the ForeRunner software CD in the CD-ROM drive and choose the OK button.
The Select OEM Option dialog box appears.
5. Select the ForeRunner ATM Adapter driver that matches your adapter
(PCA-200EPC, ForeRunnerHE, or ForeRunnerLE) and proceed through the
installation.
6. When you return to the Network Control Panel, select Add Adapter and proceed to
install one or more ForeRunner ATM ELAN and/or IP Over ATM drivers from the
\WINNT directory of the CD.
-
Install an ELAN driver for each ELAN to which you want to connect.
-
Install an IP Over ATM driver for each Classical IP (RFC 1577) LIS to which
you want to connect.
7. Bind protocols and assign IP addresses to the ELAN and IP Over ATM drivers as
necessary for your site.
8. Reboot as prompted to load the drivers.
The installation is complete. For complete installation procedures, refer to the manual
included on the ForeRunner software CD.