Fore Systems forerunner series, Configuration Manual

Page: 247 / 352

ForeRunner ATM Switch Network Configuration Manual
B - 5
Configuring Circuit Emulation Services
C
o
nfigu
ri
ng Cir
c
ui
t
Em
ul
ation
Ser
v
ice
s
B.1.2 Displaying CES Connections
To display the current CES connections, enter the following:
myswitch::configuration ces> show
CES Input Output
Service State Port Timeslots VPI VCI Type Port TimeSlots VPI VCI
24 down 1A1 1 0 129 - - - - -
31 down 1A1 2-3 0 130 spvc 1D3 - 0 32
32 down 1A1 4-5 0 131 pvc 1D4 - 0 150
33 down 1A1 6-7 0 132 spvc 1D3 - 0 35
The fields in this display are defined as follows
:
Field Description
CES Service The identification number (assigned by the switch) of this CES connection.
State Indicates whether the CES connection is enabled (
up
) or disabled (
down
).
Input Port The incoming port on which the CES connection exists.
Timeslots Indicates which timeslots (1-24 for DS1, 1-31 for E1) are configured for the input port.
all
indicates unstructured service.
Input VPI The incoming VPI value of the connection.
Input VCI The incoming VCI value of the connection.
Type The type of ATM connection (i.e., PVC or SPVC) that is associated with the CES connection.
Output Port The outgoing port on which the CES connection exists.
Timeslots Indicates which timeslots (1-24 for DS1, 1-31 for E1) are configured for the output port.
all
indicates unstructured service.
Output VPI The outgoing VPI value of the connection.
Output VCI The outgoing VCI value of the connection.