Fore Systems forerunner series, Configuration Manual

Page: 244 / 352

B - 2
ForeRunner ATM Switch Network Configuration Manual
Configuring Circuit Emulation Services
B.1 Configuring CES Connections
The
ces
commands let you create and delete CES connections, as well as display the status of
existing connections. You can display the list of available subcommands by typing
?
at the
ces
level.
myswitch::configuration ces> ?
new delete show
B.1.1 Creating a New CES Connection
To create a new CES connection, you must set several parameters. Enter the following to create
a new CES connection:
myswitch::configuration ces> new <port> <timeslots>
The CES
new
command can also be used as shown below. When the following parameters are
used, by default, an appropriate entry is made in the UPC table and a bidirectional PVC is cre-
ated with the proper UPC index.
or: new <port> <timeslots> -oport <oport> -ots <ots>
or: new <port> <timeslots> -oport <oport> -ovpi <ovpi> -ovci <ovci>
The following advanced options can be used when creating CES connections:
advanced options:
[-srts (on|off)] [-fupc <index> ] [-bupc <index> ]
[-cas (basic|cas)] [-partialfill <partialfill> ] [-reassCDVT <cdvt> ]
[-bufSize <bufSize> ] [-integ <integ> ]