Ford ZD Escape Series, Manual

Page: 23 / 152

-23-
Grasp the tongue ( 1. C ).
Slowly pull out the lap/shoulder belt. 2.
Insert the tongue ( 3. C ) into the buckle
( D ) until you hear a click.
Position the lap belt as low as 4.
possible, not on the abdominal area,
then adjust the shoulder belt so that
it fits snugly against your body.
Unfastening the lap portion of the
seat belt
Insert a small object such as a key in the
anchor buckle (
B ) slot.
Occupant protection
Stowing and pulling out the
centre-rear position seat belt
WARNING
When stowing the seat belt, make
sure the belt is locked securely
into the recess. If the seat belt is not
locked securely, it could fall down
suddenly and cause injury.
The centre-rear position seat belt can be
stowed using the following procedure.
To stow the seat belt, retract the belt, put
tongues (
A ) and ( C ) together and insert
them into the recess.
To pull out the seat belt, slide tongue
(
A ) with your finger while moving it
downward, and slowly pull out the seat
belt from the ceiling recess.