Ford VN TRANSIT CUSTOM 2013, Owner'S Manual

Page: 121 / 183

Washer fluid reservoir. See Washer Fluid Check (page 121). A
Brake and clutch fluid reservoir (right-hand drive). See Brake and Clutch Fluid
Check (page 120).
B
Brake and clutch fluid reservoir (left-hand drive). See Brake and Clutch Fluid
Check (page 120).
C
Engine junction box. See Fuses (page 106). D
Engine coolant reservoir. See Engine Coolant Check (page 120). E
Battery positive connection (for connecting booster cables). See Jump Starting
the Vehicle (page 103).
F
Engine oil dipstick
*
. See Engine Oil Check (page 119). G
Engine oil filler cap. See Engine Oil Check (page 119). H
Power steering fluid reservoir. See Power Steering Fluid Check (page 121). I
*
The filler caps and the engine oil dipstick are colored for easy identification.
ENGINE OIL DIPSTICK - 2.2L
DURATORQ-TDCI (92KW/
125PS) - PUMA
E90983
A
B
Minimum A
Maximum B
ENGINE OIL CHECK
1. Make sure that your vehicle is on level
ground.
2. Switch off the engine and wait 10
minutes for the oil to drain into the oil
pan.
3. Remove the dipstick and wipe it with
a clean, lint free cloth. Replace the
dipstick and remove it again to check
the oil level.
If the oil level is at the minimum mark, add
oil immediately.
Note: Check the oil level before starting the
engine.
Note: Make sure that the oil level is
between the minimum and the maximum
marks.
Note: Do not use oil additives or other
engine treatments. Under certain conditions,
they could damage the engine.
Note: The oil consumption of new engines
reaches its normal level after approximately
5,000 km.
Adding Engine Oil
WARNINGS
Only add oil when the engine is cold.
If the engine is hot, wait 10 minutes
for the engine to cool down.
Do not remove the filler cap when
the engine is running.
119
Tourneo Custom/Transit Custom (TTF) Vehicles Built From: 01-09-2013, enAUS, Edition date: 12/2014
Maintenance