Ford Villager Page 242 Owner'S Manual Download

Page: 242 / 400

1. Apply the main brake pedal with your foot and hold it.

2. Have another person place the wheel chocks under the trailer

wheels.

3. With the chocks in place, release the brake pedal, making sure

the chocks are holding.

4. Apply the parking brake by pressing the main brake pedal

down firmly with your right foot while depressing the
parking brake pedal with your left foot.

5. Shift the gearshift lever into P (Park).

To start, after being parked on a grade:

1. Apply the main brake pedal with your foot and hold it.

2. Start the engine.

3. Shift the gearshift lever into gear and release the parking

brake.

4. Release the main brake pedal and move the vehicle uphill to

free the wheel chocks.

5. Apply the main brake pedal and hold while another person

retrieves the chocks.

238

Summary of Contents for Villager
















































































































































































































































































































































































































Search results

Summary of Contents for Villager

Reviews:

Related manuals for Villager

Brands by name

Popular brands

Ford Villager, Owner'S Manual

Search results

Summary of Contents for Villager

Reviews:

Related manuals for Villager

Brands by name

Popular brands