Ford Villager Page 168 Owner'S Manual Download

Page: 168 / 400

Tethering to lap/shoulder belt tongue

To attach a tether strap to a lap/shoulder belt:

1. Route the tether strap under the headrest and between the

head restraint supports.

2. Hook the tether strap hook into the large hole at the end of the

tongue of the lap/shoulder belt directly behind the child seat
position.

3. Adjust the tether strap length until the hook is about one foot

behind the seatback.

4. Pull the shoulder belt until all of the belt is fully extended and

a click is heard. At this time the belt is in automatic locking
mode (child restraint mode.)

164

Summary of Contents for Villager
















































































































































































































































































































































































































Search results

Summary of Contents for Villager

Reviews:

Related manuals for Villager

Brands by name

Popular brands

Ford Villager, Owner'S Manual

Search results

Summary of Contents for Villager

Reviews:

Related manuals for Villager

Brands by name

Popular brands