4.9 Tachograph
NOTE:
Siemens VDO are now known as
Continental VDO part of Continental Automotive
Group.
It is recommended that any vehicle that requires
a tachograph is sent to an authorised Continental
VDO Tachograph Service Center for system
installation and calibration.
Details of all recommended service centers can
be found on VDO web sites. These sites also
contain details of current regulations and
tachograph operation.
4.9.1 Legislation
WARNING: All tachographs require the
same wiring connections as this is
controlled by tachograph legislation.
NOTE:
Digital Tachograph (DTCO) is the legal
requirement for Europe.
Digital (DTCO) Tachograph
Pin Assignment
For detailed information about pin assignments
please contact your local National Sales Company
representative or Continental Automotive Group
directly.
Wiring
The tachograph wiring consists of two parts:
•
Speed Sensor Harness, see figure E145371 for
harness routing.
•
Tachograph Harness, see figure E145371 for
mounting and harness routing.
4.9.2 Tachograph Harness Mounting
Standard Ford installation in the overhead console
using DIN radio bracket, see figure E145372.
FORD
TRANSIT CUSTOM
2012.75
Date of Publication: 04/2012
4 El
ec
tric
al
104
