CAUTION: Do not drill into the vehicle
before checking 'No Drill' zones and
electrical wire routing.
The areas marked in blue on figures E145339 -
E145344 show the'NO DRILL' zones for the rear
cargo area where there is wire routing and is to be
avoided, (for example: when installing cladding
and racking). The same care should also be taken
when using self tapping screws. Not all derivatives
are shown but the routing is the same for roof line
and wheel base with regards to B, C and D pillars
or roof bows and doors. Other non electrical
systems may also be present, for example: fuel
tank under floor so it is important to check before
drilling. For additional information refer to the
following links.
Refer to: 5.1 Body (page 147).
No Drill Zones -Under the Floor Tank
Load Compartment Tie Downs
Refer to: 5.3 Racking Systems (page 154).
Refer to: 5.6 Body Closures (page 161).
No Drill Zones - Closures
4.1.13 Electrics for Tow Bar
Trailer Tow Module and Harnesses
Part Number
Description
Item
BK2T-19H378-A_
Trailer Tow Module
1
BK2T-13B576-A_
Trailer Tow Jumper (with Trailer Tow Module connector 'A'
see figure E151247)
2
BK2T-13B576-D_
Trailer Tow Socket Jumper
3
BK2T-14406-**
Fuel Tank Harness
4
BK2T-14401-**
Main Harness (with Trailer Tow Module connectors 'B' and
'C' see figure E151247)
5
FORD
TRANSIT CUSTOM
2012.75
Date of Publication: 04/2012
4 El
ec
tric
al
64
