Water Hoses for Auxiliary Heating System
Description
Item
Connector (aluminum or plastic)
1
Heater hose (maintain heater fluid)
2
Original flow
3
To ancillary equipment
4
3.2.2 Auxiliary Heater Installation
Ensure that the exhaust gas from any auxiliary
heating system can not be re-circulated into the
vehicle. The exhaust gases must not pass into the
engine intake system or the air intake for the
passenger compartment ventilation. The heating
system should be installed outside the passenger
compartment. The location of the heating system
should not be in close proximity to movable
components. Any body reworks which damage
the paint must be fully protected against
corrosion.
Refer to: 5.12 Corrosion Prevention (page 177).
NOTE:
The installation must be in line with the
appropriate legal requirements.
3.2.3 Air Flow Restrictions
WARNING: Do not mount components in
front of the grille or in an area of air flow
around the engine, which could affect the
engine cooling performance.
CAUTION: Over heating within the engine
compartment can seriously compromise
component robustness.
NOTE:
Please assume under hood environment
is about 130°C when selecting appropriate
materials
NOTE:
For further information please contact
your local National Sales Company representative,
or Local Ford Dealer. If they are unable to help you
then please contact the Vehicle Converter
Advisory Service at [email protected]
Date of Publication: 04/2012
FORD
TRANSIT CUSTOM
2012.75
3 P
o
w
ertr
ain
47
