5.1.4 Floor 'No Drill Zones' under the Floor Fuel Tank
Floor 'No Drill Zones' Dimensions (mm)
394
D
Center line Front Wheel Axle
1
1282
E
Center of 'B'-Pillar
2
680
F
Center line of vehicle
3
164
G
1207
A
1074
H
1182
B
2464
J
250
C
5.1.5 Front End Integrity for Cooling,
Crash, Aerodynamics and Lighting
Cooling
Continuous air flow through the front end
and engine compartment is not to be hindered by
adding any additional equipment. If uncertain
please consult the Vehicle Converter Advisory
Service [email protected]
Lighting
Do not alter the lighting system.
Crash
Do not cut, drill or weld any parts that are
load path relevant in case of crash. Do not add
material in the crash zone. This could affect the
crash sensor calibration.
The side airbag system is not permitted if:
•
A swiveling device is fitted on the front seats.
•
Any additional material or structure is attached
to the B-pillar inner and/or outer area.
FORD
TRANSIT CUSTOM
2012.75
Date of Publication: 04/2012
5 Body and P
aint
150
