Ford TRANSIT COURIER, Owner'S Manual

Page: 140 / 306

3. Lift up the battery positive connection
point cover. For item location, refer to
the appropriate under hood overview.
See
Under Hood Overview (page 150).
4. Connect the positive (+) terminal of
vehicle B with the positive (+) terminal
of vehicle A (cable 1).
E173305
5. Connect the negative (-) terminal of
vehicle B to the Jump start stud of
vehicle A (cable 2).
To Start the Engine
1. Run the engine of vehicle B at a
moderately high engine speed.
2. Start the engine of vehicle A.
3. Run both vehicles for a minimum of
three minutes before disconnecting the
cables.
4. Disconnect the cables in the reverse
order.
Note: Do not switch the headlamps on
when disconnecting the cables. The peak
voltage could blow the bulbs.
TOWING POINTS
Front Towing Point
WARNING: Make sure that the
towing eye is fully tightened. Failure to
follow this instruction could result in
personal injury.
WARNING: You must switch the
ignition on when your vehicle is being
towed.
E152070
1
1. Gently press the towing eye
attachment point cover at the position
indicated.
2. Gently pull it straight out.
Note: The towing eye attachment point
cover has a small lanyard to keep it
attached to the bumper.
136
Tourneo Courier/Transit Courier (C4A) Vehicles Built From: 16-09-2021, CG3822en enGBR, Edition date: 202106, First-Printing
Roadside Emergencies