4.9 Tachograph
It is recommended that any vehicle that requires
a tachograph is sent to an authorized Continental
Tachograph Service Center (previously known as
Siemens VDO) for system installation and
calibration.
NOTE:
Details of all recommended service centers can
be found on VDO web sites. These sites also
contain details of current regulations and
tachograph operation.
4.9.1 Legislation
WARNING: All tachographs require the
same wiring connections as this is
controlled by tachograph legislation.
NOTE:
Digital Tachograph (DTCO) is the legal
requirement for Europe.
Digital (DTCO) Tachograph
E75502
Pin Assignment
For detailed information about pin assignments
please contact your local National Sales Company
representative or Continental Automotive Group
directly.
Wiring
The tachograph wiring consists of two parts:
•
Speed Sensor Harness, see figure E225083 for
harness routing.
•
Tachograph Harness, see figures E145371 and
E167575 for mounting and harness routing.
Date of Publication: 03/2018
FORD
TRANSIT
2016.75
4 El
ec
tric
al
157
EU
