2. Select the
Status
menu item and tap
the
Service
function button to display
the service information.
Information on the service schedule can al-
so be accessed via the Service menu
→
page 31.
Resetting the service interval display
If the service interval display was not reset
after
a service or maintenance, it can be re-
set as follows:
The service interval display can only be re-
set via the Service menu
→
page 31.
Do not reset the service interval display be-
tween service intervals, otherwise incorrect
data may be shown.
If the oil change service interval was reset
manually, the service interval display then
also changes to a
fixed
service interval in
vehicles with
flexible
oil change service.
The service message will go out
after
a few seconds when the engine is run-
ning or you can press the
button on the
multifunction steering wheel.
If the 12-volt vehicle battery was dis-
connected for long periods in vehicles
with
flexible
service, the system cannot
calculate the time at which the next service
is due. The information shown in the service
interval display may therefore be incorrect.
If this is the case, then please observe the
maximum service intervals.
Time and date
Setting the time via the digital instru-
ment cluster
1. Open the Service menu
→
page 31.
2. Select the
Time
menu.
3. Set the time with the arrow buttons
and .
Setting the time via the analogue in-
strument cluster
1. Select the
Range
information
profile.
2. Press and hold the
button on the
multifunction steering wheel for 5 sec-
onds.
The Service menu is shown on the in-
strument cluster display.
3. Select the
Time
menu.
4. Set the correct time with the
but-
ton.
Setting the time and date on the Info-
tainment system
1. Tap the
Settings
function button
→
page 34.
2. Select the
Time and date
menu option to
set the time and date.
3. Select the time source:
—
Automatic.
—
Manual.
The date is displayed only on the Info-
tainment system.
Exit menu
You can use the Exit menu to adjust
some function settings before leaving
the vehicle. The Exit menu appears on
the Infotainment system when you turn
off
the ignition.
The options shown depend on the equip-
ment and may only be available under cer-
tain conditions. The adjustable functions
might include:
— Auxiliary heater and ventilation.
— Interior monitoring.
— Vehicle status display.
Hiding the menu
The Exit menu is hidden automatically
when you leave the vehicle. There may be
a short pause before the exit menu is hid-
den, depending on the equipment.
1. To manually hide the Exit menu, tap .
Setting
You may be able to change the sequence of
the displayed entries, depending on the
equipment.
1. Tap .
Time and date
33
2KF012
720AB
Summary of Contents for TOURNEO CONNECT
Page 13: ...Driver door 11 2KF012720AB ...