Ford TOURNEO CONNECT Page 273 Owner'S Manual Download

Page: 273 / 437

WARNING

If the ball coupling is not secured, it may

flung

around the vehicle interior and

cause injuries during sudden braking or

driving manoeuvres or in the event of an

accident.

Always stow the ball coupling in the
stowage box.

NOTICE

The removable ball coupling is required for
towing. Make sure you always carry the ball
coupling in the vehicle.

→

page 307

Dimensions and mounting points
for retrofitting a towing bracket

Fig. 159

Dimensions and attachment points

for

retrofitting

a towing bracket.

Attachment points.

5-seater: 934 mm.
7-seater: 1,072 mm.

At least 65 mm.

350 mm to 420 mm.

235 mm.

531 mm.

1,022 mm.

Dimensions

The dimensions must be observed in all ca-

ses when

retrofitting

a towing bracket

Towing bracket

271

2KF012

720AB

Summary of Contents for TOURNEO CONNECT






















































































































































































































































































































































































































































Search results

Summary of Contents for TOURNEO CONNECT

Reviews:

Related manuals for TOURNEO CONNECT

Brands by name

Popular brands

Ford TOURNEO CONNECT, Owner'S Manual

Search results

Summary of Contents for TOURNEO CONNECT

Reviews:

Related manuals for TOURNEO CONNECT

Brands by name

Popular brands