manualshive.com logo in svg

Ford TOURNEO CONNECT, Owner'S Manual, Page: 259 / 437

Share
Download
Ford TOURNEO CONNECT Owner'S Manual Download Page 259

the Infotainment system and restart the

connection process.

Mobile Apps Wireless may not be sup-

ported by all technologies.

Applications (apps)

 Please refer to   and   on page 219

and   and   at the start of the chapter
on page 255.

Mobile Apps allows content from third par-
ty apps on mobile telephones to be shown
on the Infotainment system screen.
There may be problems with compatibility
with third party apps.
Apps, their use and the necessary mobile
network connection may be subject to
charges.
A wide range of apps may be available and
they may depend on the vehicle and coun-
try. The content, scope and providers of
apps can vary. Some apps also depend on
availability of services 

offered

 by third par-

ties.
We are unable to guarantee that the avail-
able apps can be run on all mobile tele-
phones and all operating systems. Apps of-
fered by Ford can be changed, discontin-
ued, deactivated, reactivated and expan-

ded without prior notice. Only 

certified

apps can be used when driving so that the
driver is not distracted.

Mobile Apps symbols and set-
tings

 Please refer to   and   on page 219

and   and   at the start of the chapter
on page 255.

The symbols may have a 

different

 appear-

ance in some Infotainment systems.

Show more information.

Show paired devices.

Open the settings menu for Mobile

Apps.

Select Apple CarPlay technology.

Select Android Auto technology.

Setting options in the settings menu

The setting options depend on the unit.

Open device manager.

Apple CarPlay

 Please refer to   and   on page 219

and   and   at the start of the chapter
on page 255.

Prerequisites for using Apple CarPlay

✓

The iPhone must support Apple Car-

Play.

✓

Voice control (Siri) must be activated
on the iPhone.

✓

Apple CarPlay must be activated in the
iPhone settings with no restrictions.

✓

If Apple CarPlay Wireless is not possi-
ble, the iPhone must be connected to
the Infotainment system via a USB port.
Only USB ports with data transfer func-
tion are suitable for using Apple Car-

Play.

✓

The USB cable used must be an original
Apple cable.

✓

Apple CarPlay Wireless: in addition,
Bluetooth and Wi-Fi must be activated
on the iPhone.

The availability of the technologies is

country-specific

 and may vary.

Making a connection

Follow the instructions on the Infotainment
system screen and the display on the
iPhone when establishing a connection for
the 

first

 time.

The prerequisites for using Apple CarPlay
must be 

fulfilled.

1. Tap 

HOME

   

Mobile Apps 

.

Mobile devices:

Mobile Apps

257

2KF012

720AB

Summary of Contents for TOURNEO CONNECT






















































































































































































































































































































































































































































Reviews:

No comments