manualshive.com logo in svg

Ford TOURNEO CONNECT, Owner'S Manual, Page: 254 / 437

Share
Download
Ford TOURNEO CONNECT Owner'S Manual Download Page 254

USB port

 Please refer to   at the start of the

chapter on page 251.

The USB port can be used to transfer
data and charge devices or only to

charge devices.

USB port type

Fig. 147 

USB-C port type in the vehicle (il-

lustration).

The following USB-C ports may be availa-
ble in the vehicle:

Indicates a USB socket for data
transfer and charging function.

Indicates a USB socket for the
charging function only.

Possible fitting locations of USB ports

The number and 

fitting

 locations of the

USB ports depend on the vehicle and
equipment level and are not available in all
countries.
— Beside the steering wheel.
— In the front passenger door.
— In the sliding doors.
— Armrest in the third row of seats.
— On the interior mirror.

USB ports on the rear seats are only
equipped with the charging function.

Available data transfer functions

The following functions of USB data trans-
mission are possible depending on the
equipment level.
— App-Connect 

→

 page 255.

— Media playback 

→

 page 234.

— Update, e.g. the navigation data

→

 page 243.

Available charging power

Voltages of up to 20 V are provided via the

USB port, and this allows for a charging
power of up to 45 W.
Depending on the equipment level, the fol-

lowing charging 

profiles

 can be supported

by the USB sockets:
— Legacy charging (2.5 W).
— BC1.2 (7.5 W).
— USB-C charging (15 W).
— USB Power Delivery (up to 45 W).
The actual charging power taken by the
connected device depends on the following
points:
— Supported charging 

profiles.

— Charge level of the device.
— Temperature of the device.
— Charging cable used.

With double USB ports, the charging
power can be divided between the

two ports.

Notes and restrictions

— Only use suitable USB connection ca-

bles. The USB connection cable must
match the USB port installed in the vehi-
cle.

— Dirty, overheated and damaged data me-

dia may become unusable. Please ob-
serve the manufacturer’s instructions.

— Quality 

differences

 in data media from

different

 manufacturers may cause mal-

functions in the media playback.

— If a USB extension cable, USB connector

adapter or USB hub is used, this can lead
to faults with or failure of the USB func-
tions.

252

Infotainment system

Summary of Contents for TOURNEO CONNECT






















































































































































































































































































































































































































































Reviews:

No comments