Ford TOURNEO CONNECT, Owner'S Manual

Page: 235 / 437

frequency band, the station list normally
updates itself automatically.
1. Open the station list.
2. Tap the required station.
The selected station is set. In the case
of FM/DAB, the best reception mode is
selected automatically according to
availability of the station.
SCAN Searching in SCAN mode (AM
and FM/DAB)
In SCAN mode, the stations on the frequen-
cy band are set automatically one
after the
other and played back for approx. 5 sec-
onds.
1. Tap
SCAN to start SCAN mode.
SCAN mode starts and the station cur-
rently set is shown in the display.
A
SCAN function button is displayed
next to it.
2. To select a station, tap SCAN .
SCAN mode stops and the station is
set.
SCAN is hidden.
Storing stations to station buttons
You can store up to 38 stations from differ-
ent frequency bands and reception modes
on station buttons as Favorites.
1. Set the required station.
2. Call up the station buttons.
3. Tap .
Or: tap an already assigned station but-
ton and hold for around 3 seconds.
Or: tap and hold a station in the station
list.
The station buttons are displayed.
4. Tap the desired station button.
The station is stored to the selected
station button.
If a station has already been stored to
the station button, that station will be
removed from the station button and
replaced by the new station.
Showing or hiding display of station
logos and the DAB slideshow
1.
Tap .
2. Tap radio text in the current playback
mode to show or hide display of station
logos and the DAB slideshow.
Special functions in radio mode
Please refer to and on page 219.
The special functions in radio mode listed
below may not be available in all Infotain-
ment systems or in all countries, depending
on the equipment.
You can activate and deactivate the special
radio mode functions listed below in the ra-
dio mode settings
→
page 231.
TP (Traffic Programme)
The TP function monitors the reports from
a set
traffic news station and automatically
outputs them in radio mode or during me-
dia playback. It must be possible to receive
a traffic news station for this purpose.
Some stations that do not broadcast their
own
traffic news support the TP function
through a corresponding traffic news sta-
tion (EON).
The system will always automatically tune
to a
traffic news station in the background
if one is available in the AM frequency band
or media mode.
If no
traffic news station can be received,
No TP is shown in the display. The unit will
automatically search for an available traffic
news station. As soon as a new traffic news
station is available, the status on the dis-
play changes back to
TP .
The TP function must be activated in the
settings for radio mode in order to receive
traffic announcements.
Traffic news stations are not available in all
countries.
Switching the TP function on
1. In radio or media mode, tap Radio
and activate Traffic programme TP .
Other announcements
In addition to the messages from the TP
function, you can also receive other an-
nouncements from the radio stations in the
Radio mode 233
2KF012
720AB