
To maintain your vehicle load carrying
capability, your vehicle requires different
tire pressures in the front tires compared
to the rear tires.
The system illuminates the warning lamp
at different pressures for the front and rear
tires.
The tires need to be periodically rotated
to provide consistent performance and
maximum tire life, the system needs to
know when the tires have been rotated to
determine which set of tires are on the
front and rear axles. With this information,
the system can detect and correctly warn
of low tire pressures.
Carrying Out the System Reset
Procedure
1.
Check the tire pressures and inflate all
the tires to the correct pressure.
2. See
To reset the tire pressure monitoring system, scroll to:
Description and Action
Message
Press the
OK
button.
Settings
Press the
OK
button.
Driver assist
Press and hold the
OK
button until confirmation appears.
Alternatively, if your vehicle has a tire pressure monitoring
system reset button, press and hold the button until
confirmation appears.
Tire Monitor
Type Approvals
Refer to See
for Tire Pressure Monitoring Sensor Radio
Frequency Compliance details.
CHANGING A ROAD WHEEL
Locking Wheel Nuts
You can obtain a replacement locking
wheel nut key and replacement locking
wheel nuts from your dealer using the
reference number certificate.
Vehicles with a Spare Wheel
If the spare wheel is the same type and
size as your vehicle road wheel, you can fit
the spare wheel and continue to drive in
the normal manner.
WARNING
Only fit snow chains to specified
tires. See
Note:
Your vehicle may exhibit some
unusual driving characteristics.
258
Ranger (), EB3B-19G219-ZAB enAUS
Wheels and Tires