manualshive.com logo in svg

Ford RANGER 2016, Owner'S Manual, Page: 61 / 478

Share
Download
Ford RANGER 2016 Owner'S Manual Download Page 61

CARGO LAMPS

 (If Equipped)

The cargo lamp is located above the load
compartment.

Operation of the cargo lamp is only
possible when the vehicle is stationary
(automatic transmission must be in park
(P), park brake must be applied for manual
transmission) and either of the following
conditions are met:

•

The driver or passenger door is open.

•

The engine is off (ignition in the Off or
Acc. Position).

E224576

Note:

The cargo lamp operates on a timer

and will turn off when the timer runs out or
when one of the conditions are no longer
met.

Once the conditions are met the cargo
lamp will turn on automatically.

If the conditions are met and the timer runs
out the cargo lamp can be activated by
pressing the switch. The cargo lamp
cannot be turned off by pressing the
switch.

58

Ranger (TKE) Vehicles Built From: 02-05-2016 Vehicles Built Up To: 04-09-2016, EB3B-19G219-AKC enGBR, First Printing

Lighting

Summary of Contents for RANGER 2016































































































































































































































































































































































































































































































Reviews:

No comments