manualshive.com logo in svg

Ford RANGER 2016, Owner'S Manual, Page: 358 / 478

Share
Download
Ford RANGER 2016 Owner'S Manual Download Page 358

Description

Command

Makes a best guess from the media suggestion list. The
system may occasionally ask you questions.

media candidate lists off

Clarifies your voice command for media suggestions.

media candidate lists on

Makes a best guess from the cell phone suggestion list. The
system may occasionally ask you questions.

phone candidate lists off

Clarifies your voice command for cell phone suggestions.

phone candidate lists on

Changing the Voice Settings

You can change the voice settings using
the information and entertainment display.

Press the 

MENU

 button.

You can then select the following:

Message

Action

SYNC-Settings

Enters menu for voice options.

Voice settings

USING SYNC™ WITH YOUR
PHONE

Hands-free calling is one of the main
features of SYNC. While the system
supports a variety of features, many are
dependent on your cell phone's
functionality.

At a minimum, most cell phones with
Bluetooth wireless technology support the
following functions:
•

Answering an incoming call.

•

Ending a call.

•

Using privacy mode.

•

Dialing a number.

•

Redialing.

•

Call waiting notification.

•

Caller ID.

Other features such as text messaging
using Bluetooth and automatic phonebook
download are cell phone dependent
features. To check your cell phone's
compatibility, refer to your device's manual
or visit the regional Ford website.

Pairing a Cell Phone For the First
Time

Wirelessly pairing your cell phone with the
system allows you to make and receive
hands-free calls.

Note:

You must switch the ignition and

radio on.

Note:

To scroll through the menus, press

the up or down arrows on your audio system.

1.

Make sure the Bluetooth feature on
your cell phone is switched on before
starting the search. Refer to your
device's manual if necessary.

355

Ranger (TKE) Vehicles Built From: 02-05-2016 Vehicles Built Up To: 04-09-2016, EB3B-19G219-AKC enGBR, First Printing

SYNC™

 (If Equipped)

Summary of Contents for RANGER 2016































































































































































































































































































































































































































































































Reviews:

No comments