manualshive.com logo in svg

Ford RANGER 2016, Owner'S Manual, Page: 352 / 478

Share
Download
Ford RANGER 2016 Owner'S Manual Download Page 352

•

The disc name.

•

The artist name.

•

The track name.

Note:

You can select these display options

in the same way as MP3 displays.

Ending Compact Disc Playback

To restore radio reception on all units,
press 

RADIO

.

Note:

The CD does not eject. The disc

pauses at the point where radio reception
returned.

To resume CD playback, press 

CD

 again.

MEDIA HUB

Type 1

E217515

A

LINE IN.

A

Type 2

E217516

A

B

LINE IN.

A

USB ports.

B

Type 3

A

C

B

E170492

LINE IN.

A

USB ports.

B

SD card slot.

C

349

Ranger (TKE) Vehicles Built From: 02-05-2016 Vehicles Built Up To: 04-09-2016, EB3B-19G219-AKC enGBR, First Printing

Audio System

Summary of Contents for RANGER 2016































































































































































































































































































































































































































































































Reviews:

No comments