manualshive.com logo in svg

Ford RANGER 2016, Owner'S Manual, Page: 332 / 478

Share
Download
Ford RANGER 2016 Owner'S Manual Download Page 332

VOL and Power:

 Press this button to turn the system off and on. Turn it to

adjust the volume.

Q

MENU:

 Press this button to access different audio system features. See 

Menu

Structure

 later in this section.

R

PHONE:

 Press this button to access the phone features of the SYNC system.

See 

SYNC™

 (page 351).

S

MEDIA:

 Press this button to access your auxiliary inputs or switch between

bluetooth audio devices you plug into the input jack or USB port.

T

RADIO:

 Press this button to listen to the radio or change radio frequencies

bands. Press the function buttons below the radio screen to select different
radio functions.

U

AUDIO UNIT - VEHICLES WITH:
AM/FM/AUX IN/USB/
BLUETOOTH

WARNING

Driving while distracted can result in
loss of vehicle control, crash and
injury. We strongly recommend that

you use extreme caution when using any
device that may take your focus off the
road. Your primary responsibility is the safe
operation of your vehicle. We recommend
against the use of any hand-held device
while driving and encourage the use of
voice-operated systems when possible.
Make sure you are aware of all applicable
local laws that may affect the use of
electronic devices while driving.

Note:

Depending on your vehicle option

package, your system may look different
from what you see here.

Note:

Some features may not be available

in your location. Check with an authorized
dealer.

329

Ranger (TKE) Vehicles Built From: 02-05-2016 Vehicles Built Up To: 04-09-2016, EB3B-19G219-AKC enGBR, First Printing

Audio System

Summary of Contents for RANGER 2016































































































































































































































































































































































































































































































Reviews:

No comments