manualshive.com logo in svg

Ford Ranger 2012, Owner'S Manual, Page: 76 / 276

Share
Download
Ford Ranger 2012 Owner'S Manual Download Page 76

Folding the Seat Backrest - Super
Cab

Fold the front passenger seat to allow easy
access to the rear seat.

E136219

Bench Seat

E135862

POWER SEATS

WARNINGS

Use seat covers designed for seats
with side airbags. Have these fitted
by an authorized dealer.

Do not adjust the driver seat when
your vehicle is moving.

Do not place cargo or any objects
behind the seatback before returning
it to the original position.

Note:

Seat covers fitted to your vehicle as

part of a special equipment pack are
washable without removing them from the
seats.

Note:

Seat covers are designed and fitted

to work with the seat's existing features and
safety systems, and should not require
adjustment. If seat cover removal and
installation is required, see an authorized
Ford dealer.

Moving the Seat Backward and
Forward

E131591

74

Ranger (TKE) Vehicles Built From: 01-12-2014, DB39-120609-JB enAUS, First Printing

Seats

Summary of Contents for Ranger 2012





















































































































































































































































































Reviews:

No comments