Ford MUSTANG MACH 1 2021 Page 33 Supplement Manual Download

Page: 33 / 84

TOWING A TRAILER

WARNING:

Your vehicle is

not approved for trailer towing.
Never tow a trailer with your
vehicle.

TRANSPORTING THE VEHICLE

E203788

If you need to have your vehicle towed,
contact your roadside assistance center
or a professional towing service.

We recommend that your vehicle be towed
with flatbed equipment only. When towing
with a flatbed, race ramps or wood ramps
must be used when loading or unloading
your vehicle. Wheel baskets are required
when flatbed towing.

Your vehicle comes with a front recovery
hook to assist in vehicle recovery
situations. See

Towing Points

(page 36).

Perform the following when towing your
vehicle:
•

Enable manual park override. See

Automatic Transmission

(page 20).

Note:

Do not use the Stay in Neutral Mode

for towing.

Note:

Do not tow with a slingbelt or wheel

lift equipment.

Note:

If the vehicle is towed incorrectly or

by any other means, vehicle damage may
occur.

Mustang (CZG) Mach 1, enUSA, First-Printing

Towing

Summary of Contents for MUSTANG MACH 1 2021





















































































Search results

Summary of Contents for MUSTANG MACH 1 2021

Reviews:

Related manuals for MUSTANG MACH 1 2021

Brands by name

Popular brands

Ford MUSTANG MACH 1 2021, Supplement Manual

Search results

Summary of Contents for MUSTANG MACH 1 2021

Reviews:

Related manuals for MUSTANG MACH 1 2021

Brands by name

Popular brands