M-16612-C20
GT500 Carbon Fiber Hood Vent with Rain Tray
Installation
IS M-16612-MCF 042121
PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION. AT ANY TIME YOU DO
NOT UNDERSTAND THE INSTRUCTIONS, PLEASE CALL THE ANDERSON COMPOSITES CUSTOMER SERVICE LINE AT
1- 877-624-2662 (9:00 AM
–
5:30 PM CALIFORNIA TIME, MON-FRI)
Carbon Fiber Hood Vent with Rain Tray
OEM HOOD VENT/RAIN TRAY ASSEMBLY REMOVAL
1.
Open the hood
2.
Remove the thirteen (13) bolts, save for installation
3.
Pull out the front edge of hood scoop and remove the two (2) pin-type retainers, be careful
not to damage upon removal and save for installation
4.
Slide assembly up and remove the hood scoop/rain tray assembly
5.
Place assembly on a soft cloth (hood vent side down)
6.
Remove the eight (8) T25 Torx fasteners and (2) rubber bumpers from rain tray, save for
reassembly
7.
Wrap assembly in a soft cloth to prevent scratches, store in safe location to prevent damage