Ford Granada 1985-1994, Owner'S Manual

Page: 189 / 254

6 Disconnect the glovebox arms and hinges.
Withdraw the hinge pins and remove the lid.
7 Slide the auxiliary fuse panel off its
mounting and remove the glovebox light
(when fitted).
8 Remove the ABS and ESC/EEC modules
(Chapter 13). Remove the two nuts and
washers from inside the glovebox.
9 Remove the radio, stowage box or graphic
equaliser, ashtray, cigarette lighter panel and
(when applicable) the gear lever gaiter.
10 Remove the centre console, disconnecting
switches, rear heater controls etc as
necessary.
11 Remove the six screws which secure the
passenger’s side lower panel. Remove the
panel. 12 Refit by reversing the removal operations,
transferring the brackets, captive nuts or other
fittings to any new panels being fitted.
Models from April 1992
13 Disconnect the battery negative terminal.
14 Remove the centre console.
15 Remove the radio, amplifier unit and
(where necessary) the CD player.
16 Remove the instrument cluster.
17 Remove the steering wheel and then the
steering column direction indicator/headlight
flasher switch and windscreen wipe/wash
switch.
18 Pull off the three knobs from the heater
and ventilation controls to gain access to the
two hidden central vent panel retaining
screws. Slacken and remove the four panel
retaining screws and partially withdraw the
panel. Disconnect the wiring connectors from
the heated window switches and fuel
computer (where fitted) and remove the panel
from the car (see illustrations).
19 Undo the two retaining screws and free
the heater and ventilation control panel from
the facia panel (see illustration).
20 Depress the retaining tang, situated at the
bottom of the control knob, and remove the
light switch knob from the switch (see
illustration).
21 Withdraw the light switch from right-hand
vent panel and disconnect the wiring plug (see
illustration).
22 Remove the light switch surround from the
vent panel and disconnect the wiring
connector
(see illustration).
23 Undo the three retaining screws and
remove the right-hand vent panel from the
facia (see illustration).
24 Remove the ashtray insert, then slacken
and remove the three ashtray retaining
screws. Remove the ashtray assembly,
detaching the illumination lamp as it is
removed (see illustration).
25 Undo the retaining screw then disconnect
the wiring plugs and remove the cigarette
lighter from the facia panel (see illustration).
26 Unclip and remove both the left- and right-
hand facia undercover panels.
27 Carefully prise out the bonnet release lever
surround to gain access to the lever retaining
Bodywork and fittings 12•13
12
41.18a Remove the control knobs to gain
access to the two hidden central vent
panel retaining screws (arrowed)
41.18b Withdraw the central vent panel and
disconnect the heated window and fuel
computer wiring connectors
41.19 Undo the heater control panel
retaining screws and free the panel from
the facia
41.22 Withdraw the light switch surround
and disconnect the wiring connector
41.20 Depress the tang (arrowed) and pull
off the light switch control knob
41.21 Withdraw the light switch and
disconnect the wiring plug
41.23 Undo the three retaining screws
(arrowed) to disconnect the right-hand vent
41.24 Ashtray retaining screw locations
(arrowed)