Ford Galaxy 2007, Owner'S Handbook Manual, Page: 65 / 312

Note: When fitting the headlamp,
make sure that you reconnect the
electrical connector properly.
Note:
When fitting the headlamp,
make sure that you fully engage the
headlamp in the lower fixing point.
Note: When fitting the headlamp,
place the front screw into the
headlamp unit before you install it.
Tighten the front screw first and then
the rear screw.
CHANGING A BULB
WARNINGS
Switch off the lights and the
ignition.
Let the bulb cool down before
removing it.
Have Xenon bulbs changed by
a trained technician. There is a
risk of electric shock.
CAUTIONS
Do not touch the glass of the
bulb.
Only fit bulbs of the correct
specification. See
Bulb
specification chart (page 75).
Headlamp
A B C D
E72258
Direction indicator A
Headlamp main beam B
Headlamp dipped beam C
Cornering lamp D
Remove the covers to gain access
to the headlamp and cornering lamp
bulbs.
Direction indicator
1. Remove the headlamp. See
Removing a headlamp (page
62).
E72259
2
3
63
Lighting