Keys and Intelligent Access
Action
Message
Displayed as a reminder to press the brake while starting the
vehicle.
Press Brake to START
Displayed if the key is not detected by the system. See
Keyless Starting
(page 136).
No Key Detected
Displayed when the StartStop button is pressed to shut off
the engine and an Intelligent Access key is not detected inside
the vehicle.
Restart Now or Key is
Needed
Displayed when the vehicle is in the run ignition state.
Run Power Active
This message is displayed when there is a problem with your
vehicle’s starting system. See your authorized dealer for
service.
Starting System Fault
Displayed as a reminder to press the brake and clutch while
starting the vehicle.
Press Brake and Clutch
to Start
Displayed as a reminder to press the clutch in while starting
the vehicle.
Press Clutch to Start
Displayed during spare key programming, when an intelligent
access key is programmed to the system.
Key Program Successful
Displayed during spare key programming, when an intelligent
access key has failed to be programmed.
Key Program Failure
Displayed during spare key programming when the maximum
number of keys have been programmed.
Max Number of Keys
Learned
Displayed during spare key programming when not enough
keys have been programmed.
Not Enough Keys
Learned
Displays when the key battery is low. Change the battery as
soon as possible.
Key Battery Low Replace
Soon
Displayed when an attempt is made to program a spare key
using two existing keys.
Could Not Program
Integrated Key
Displays to inform the driver that they are exiting the vehicle
and the engine is on.
Engine On
103
Fusion (CC7) , enUSA
Information Displays