manualshive.com logo in svg

Ford Fusion 2011, Owner'S Manual

Looking for the Owner's Manual for your Ford Fusion 2011? Look no further! Download the comprehensive manual for free from manualshive.com, providing you with all the essential information you need to understand and maintain your Ford Fusion 2011. Don't miss out on this valuable resource!

Share
Download
background image

4. Remove the bulb socket by
turning it counterclockwise and
pulling it straight out.

5. Pull the bulb from the socket and
push in the new bulb.

6. Install the bulb socket into the
lamp assembly by rotating it
clockwise.

7. Carefully push the trunk side
panel (dark grey, soft wheelhouse
side trim panel) back in position to the luggage scuff plate (hard
molding).

8. Install trunk floor carpeting panel.

Replacing high-mount brake lamp bulb

Your vehicle is equipped with an LED center high-mount stop lamp. It is
designed to last the life of the vehicle. If replacement is required, see
your authorized dealer.

Replacing license plate lamp bulbs

1. Make sure the headlamp control
is in the off position.

2. Remove the screws from the
license plate lamp assembly.

3. Remove bulb socket by turning
counterclockwise.

4. Carefully pull the bulb out from
the socket.

Install new bulb(s) in reverse order.

Lights

70

2011 Fusion

(fsn)

Owners Guide, 3rd Printing
USA

(fus)

Summary of Contents for Fusion 2011























































































































































































































































































































































































Reviews:

No comments

Related manuals for Fusion 2011

LaserTrack Flare Installation Manual preview
Flare
Brand: LaserTrack Pages: 12
Jeep UNIVERSAL CJ-2A Operation Data preview
UNIVERSAL CJ-2A
Brand: Jeep Pages: 27
Jeep RENEGADE 2016 User Manual preview
RENEGADE 2016
Brand: Jeep Pages: 228
Jeep PATRIOT 2013 User Manual preview
PATRIOT 2013
Brand: Jeep Pages: 108
Jeep PATRIOT 2013 Owner'S Manual preview
PATRIOT 2013
Brand: Jeep Pages: 525
Jeep 2014 Wrangler Owner'S Manual preview
2014 Wrangler
Brand: Jeep Pages: 673
Chevrolet Avalanche 2005 Owner'S Manual preview
Avalanche 2005
Brand: Chevrolet Pages: 494
Doug Thorley Headers THY-464-1 Instructions preview
THY-464-1
Brand: Doug Thorley Headers Pages: 5
Edelbrock 66002 Installation Instructions preview
66002
Brand: Edelbrock Pages: 2
CITROËN C4 CACTUS Handbook preview
C4 CACTUS
Brand: CITROËN Pages: 301
Inbay 241170-53-1 Installation Manual preview
241170-53-1
Brand: Inbay Pages: 20
Ford 2004 Navigator Owner'S Manual preview
2004 Navigator
Brand: Ford Pages: 368
MAcarbon Ferrari 360 Map Carbon Light Installation Instructions preview
Ferrari 360 Map Carbon Light
Brand: MAcarbon Pages: 4
Van Guard VG273 Fitting Instructions preview
VG273
Brand: Van Guard Pages: 3
tams elektronik 54-01016 Manual preview
54-01016
Brand: tams elektronik Pages: 44
Zap XEBRA ZAPCAR Series Owner'S Manual preview
XEBRA ZAPCAR Series
Brand: Zap Pages: 16
E&G Classics 1398-0502-09 Instruction Manual preview
1398-0502-09
Brand: E&G Classics Pages: 2
ZAPTEC ZapCharger Portable C1 User Manual preview
ZapCharger Portable C1
Brand: ZAPTEC Pages: 20

Brands by name

Popular brands

Load more brands