manualshive.com logo in svg

Ford Fusion 2011, Owner'S Manual

Looking for the Owner's Manual for your Ford Fusion 2011? Look no further! Download the comprehensive manual for free from manualshive.com, providing you with all the essential information you need to understand and maintain your Ford Fusion 2011. Don't miss out on this valuable resource!

Share
Download
background image

The system will automatically determine fan speed, airflow distribution,
A/C on or off, and outside or recirculated air, to heat or cool the vehicle
to reach the desired temperature. Turn to increase/decrease the
temperature on the driver side of the vehicle. The control also adjusts
the passenger side temperature when PASS TEMP is disengaged. The
recommended initial setting is between 72°F (22°C) and 75°F (24°C),
then adjust for comfort. The driver side temperature setting will appear
in the upper left corner of the display.

2.

R

Rear defroster:

Press to activate/deactivate the rear window

defroster. The button will also activate/deactivate the heated mirrors (if
equipped). Refer to

Rear window defroster

later in this chapter for

more information.

3.

Defrost:

Distributes outside air through the windshield defroster

vents and demister vents. Can be used to clear the windshield of fog and
thin ice. The system will automatically provide outside air to reduce
window fogging. Press this button again to return to the previous air flow
selection. To return to full automatic control, press AUTO.

4.

:

Distributes air through the windshield defroster vents, demister

vents, floor vents and rear seat floor vents. The system will automatically
provide outside air to reduce window fogging. To return to full automatic
control, press AUTO.

5.

Power/

:

Press to activate/deactivate the climate control

system. When the system is off, outside air is prevented from entering
the vehicle through the vents. Press +

or –

to select the desired

fan speed manually. To return to full automatic control, press AUTO.

6.

:

Distributes air through the instrument panel vents. To return to

full automatic control, press AUTO.

7.

:

Distributes air through the instrument panel vents, demister

vents, floor vents and rear seat floor vents. To return to full automatic
control, press AUTO.

8.

:

Distributes air through the demister vents, floor vents and rear

seat floor vents. To return to full automatic control, press AUTO.

9.

PASS TEMP (passenger temperature):

Press to engage/disengage

separate passenger side temperature control. Turn to increase/decrease
the temperature on the passenger side of the vehicle. The recommended
initial setting is between 72°F (22°C) and 75°F (24°C), then adjust for
comfort. The passenger side temperature setting will appear in the upper
right corner of the display.

Climate Controls

47

2011 Fusion

(fsn)

Owners Guide, 3rd Printing
USA

(fus)

Summary of Contents for Fusion 2011























































































































































































































































































































































































Reviews:

No comments

Related manuals for Fusion 2011

Parrot CK 3000 Evolution Specifications preview
CK 3000 Evolution
Brand: Parrot Pages: 2
Horn Tools HISDMSPTRA01 Mounting Instructions preview
HISDMSPTRA01
Brand: Horn Tools Pages: 6
Kia CADENZA 2019 Features & Functions Manual preview
CADENZA 2019
Brand: Kia Pages: 54
Metra Electronics 99-9001 Installation Instructions preview
99-9001
Brand: Metra Electronics Pages: 2
Chevrolet 1999 Malibu Owner'S Manual preview
1999 Malibu
Brand: Chevrolet Pages: 344
Prorack K692 Fitting Instructions Manual preview
K692
Brand: Prorack Pages: 15
Thule 1430 Kit Instructions Manual preview
1430 Kit
Brand: Thule Pages: 8
BMW 323Ci Manual preview
323Ci
Brand: BMW Pages: 189
Abrams RE-47X Installation And Operation Manual preview
RE-47X
Brand: Abrams Pages: 12
Yakima K896 Instructions Manual preview
K896
Brand: Yakima Pages: 12
Aries 2051182 Installation Manual preview
2051182
Brand: Aries Pages: 3
Master Tailgaters MR-43E2DVR1 User Manual preview
MR-43E2DVR1
Brand: Master Tailgaters Pages: 10
Acura TSX 2014 Advanced Technology Manual preview
TSX 2014
Brand: Acura Pages: 19
Ford 2009 Edge Owner'S Manual preview
2009 Edge
Brand: Ford Pages: 325
Ford 2000 F 350 Owner'S Manual preview
2000 F 350
Brand: Ford Pages: 256
AllTrade Powerbuilt 648601 Operating Instructions preview
Powerbuilt 648601
Brand: AllTrade Pages: 3
Perrycraft SportQuest Series Installation preview
SportQuest Series
Brand: Perrycraft Pages: 2
Rugged Ridge 13551.33 Manual preview
13551.33
Brand: Rugged Ridge Pages: 3

Brands by name

Popular brands

Load more brands