manualshive.com logo in svg

Ford Fusion 2011, Owner'S Manual

Looking for the Owner's Manual for your Ford Fusion 2011? Look no further! Download the comprehensive manual for free from manualshive.com, providing you with all the essential information you need to understand and maintain your Ford Fusion 2011. Don't miss out on this valuable resource!

Share
Download
background image

In case there is a problem with the
front passenger sensing system, the
airbag readiness light in the
instrument cluster will stay lit.

If the airbag readiness light is lit, do the following:

The driver and/or adult passengers should check for any objects that
may be lodged underneath the front passenger seat or cargo interfering
with the seat.

If objects are lodged and/or cargo is interfering with the seat; please take
the following steps to remove the obstruction:

•

Pull the vehicle over.

•

Turn the vehicle off.

•

Driver and/or adult passengers should check for any objects lodged
underneath the front passenger seat or cargo interfering with the seat.

•

Remove the obstruction(s) (if found).

•

Restart the vehicle.

•

Wait at least two minutes and verify that the airbag readiness light is
no longer illuminated

•

If the airbag readiness light remains illuminated, this may or may/not
be a problem due to the front passenger sensing system.

DO NOT attempt to repair or service the system; take your vehicle
immediately to an authorized dealer.

If it is necessary to modify an advanced front airbag system to
accommodate a person with disabilities, contact the Ford Customer
Relationship Center at the phone number shown in the

Customer

Assistance

section of this Owner’s Guide.

WARNING:

Any alteration/modification to the front passenger

seat may affect the performance of the front passenger sensing

system.

Determining if the system is operational

The supplemental restraint system uses a warning indicator light in the
instrument cluster or a backup tone to indicate the condition of the
system. Refer to the

Warning lights and chimes

section in the

Instrument Cluster

chapter. Routine maintenance of the airbag is not

required.

Seating and Safety Restraints

154

2011 Fusion

(fsn)

Owners Guide, 3rd Printing
USA

(fus)

Summary of Contents for Fusion 2011























































































































































































































































































































































































Reviews:

No comments

Related manuals for Fusion 2011

Raven CR7 Calibration Manual preview
CR7
Brand: Raven Pages: 24
Weather Guard 237 Assembly And Installation Instructions preview
237
Brand: Weather Guard Pages: 4
NavLinkz CAM-N-CV133-V Manual preview
CAM-N-CV133-V
Brand: NavLinkz Pages: 4
Ford E-Transit 2022 Manual preview
E-Transit 2022
Brand: Ford Pages: 22
ECS Electronics CR-066-BHU Manual preview
CR-066-BHU
Brand: ECS Electronics Pages: 16
iRacing Porsche 911 GT3 R User Manual preview
Porsche 911 GT3 R
Brand: iRacing Pages: 25
Inbay 241170-53-1 Installation Manual preview
241170-53-1
Brand: Inbay Pages: 20
Quadratec 12226.3011 Installation Manual preview
12226.3011
Brand: Quadratec Pages: 8
Camoplast Polaris TATOU 4S Installation Manuallines preview
Polaris TATOU 4S
Brand: Camoplast Pages: 13
Abrams RE-47X Installation And Operation Manual preview
RE-47X
Brand: Abrams Pages: 12
JSPORT JSRLP024 Installation Instructions preview
JSRLP024
Brand: JSPORT Pages: 2
Alphasonik PCP15LDE Owner'S Manual preview
PCP15LDE
Brand: Alphasonik Pages: 8
TATA Motors Harrier 2021 Owner'S Manual preview
Harrier 2021
Brand: TATA Motors Pages: 308
Jaeger 21010508J Fitting Instructions Manual preview
21010508J
Brand: Jaeger Pages: 14
Westin 32-2250 Instructions preview
32-2250
Brand: Westin Pages: 3
Renault CAPTUR 2019 Vehicle Instruction Card preview
CAPTUR 2019
Brand: Renault Pages: 11
Buick 1995 Roadmaster Manual preview
1995 Roadmaster
Brand: Buick Pages: 340
Kia 2015 optima Quick Start Manual preview
2015 optima
Brand: Kia Pages: 5

Brands by name

Popular brands

Load more brands