manualshive.com logo in svg

Ford Fusion 2011, Owner'S Manual

Looking for the Owner's Manual for your Ford Fusion 2011? Look no further! Download the comprehensive manual for free from manualshive.com, providing you with all the essential information you need to understand and maintain your Ford Fusion 2011. Don't miss out on this valuable resource!

Share
Download
background image

WARNING:

Failure to inspect and replace if necessary the belt

and retractor assembly after an accident could increase the risk

of injury in a collision.

Safety belt pretensioner

Your vehicle is equipped with safety belt pretensioners at the driver and
front outboard passenger seating positions.

The safety belt pretensioner tightens the safety belts firmly against the
occupant’s body at the start of the crash.

WARNING:

The driver and front passenger safety belt system

(including retractors, buckles and height adjusters) must be

replaced if the vehicle is involved in a collision that results in
deployment of front airbags, seat-mounted side airbags and side air
curtains, and safety belt pretensioners.

Safety belt extension assembly

If the safety belt is too short when fully extended, there is an 8 inch
(20 cm) safety belt extension assembly that can be added (part number
611C22). This assembly can be obtained from an authorized dealer.

Use only extensions manufactured by the same supplier as the safety
belt. Manufacturer identification is located at the end of the webbing on
the label. Also, use the safety belt extension only if the safety belt is too
short for you when fully extended.

WARNING:

Do not use extensions to change the fit of the

shoulder belt across the torso.

Seating and Safety Restraints

139

2011 Fusion

(fsn)

Owners Guide, 3rd Printing
USA

(fus)

Summary of Contents for Fusion 2011























































































































































































































































































































































































Reviews:

No comments

Related manuals for Fusion 2011

Kargo Master 40020 Assembly Manual preview
40020
Brand: Kargo Master Pages: 6
FANATEC Porsche 911 Turbo S Wheel Developer Quick Manual preview
Porsche 911 Turbo S Wheel
Brand: FANATEC Pages: 9
hager witty park XEV6 Series Installation Manual preview
witty park XEV6 Series
Brand: hager Pages: 9
iDataLink maestro Rr Install Manual preview
maestro Rr
Brand: iDataLink Pages: 106
Westin 23-3130 Instructions preview
23-3130
Brand: Westin Pages: 3
GMC 2005 Sierra Denali Owner'S Manual preview
2005 Sierra Denali
Brand: GMC Pages: 428
Mercedes-Benz GLA 250 2019 Operator'S Manual preview
GLA 250 2019
Brand: Mercedes-Benz Pages: 346
Thule Kit 1514 Instructions preview
Kit 1514
Brand: Thule Pages: 4
Farad BARS PR25 - 2 Quick Start Manual preview
BARS PR25 - 2
Brand: Farad Pages: 8
Lexus LX 470 Owner'S Manual preview
LX 470
Brand: Lexus Pages: 369
Mountain Top Sports Bar Installation Manual preview
Sports Bar
Brand: Mountain Top Pages: 12
Nav TV PCM3CAM Install Manual preview
PCM3CAM
Brand: Nav TV Pages: 4
Flash Cover MN002 Installation Manual preview
MN002
Brand: Flash Cover Pages: 2
Mercedes-Benz 2015 SLK Operator'S Manual preview
2015 SLK
Brand: Mercedes-Benz Pages: 358
Anker Technology Roav VIVA Owner'S Manual preview
Roav VIVA
Brand: Anker Technology Pages: 8
Quadratec QuadraTop 11051.0415 Installation Manual preview
QuadraTop 11051.0415
Brand: Quadratec Pages: 8
Packard 1948 eight Operating Instructions Manual preview
1948 eight
Brand: Packard Pages: 25
Safe Fleet Prime Design OCM-3032 Quick Start Manual preview
Prime Design OCM-3032
Brand: Safe Fleet Pages: 4

Brands by name

Popular brands

Load more brands