Ford Ford Fiesta 2010, Owner'S Manual

Page: 157 / 192

Note: A phone call will be disconnected
if the audio unit is switched off. If the
ignition key is turned to the off position
the phone call will remain in progress.
TELEPHONE CONTROLS
(G1084240)
Remote control
Voice and mode button
E102756
Incoming calls can be accepted by
pressing the MODE button once. Press
the button again to end the call.
USING THE TELEPHONE
(G1084336)
Note:
Refer to your audio guide for
details of the controls. See Audio unit
overview (page 136).
This chapter describes the phone
functions of the audio unit.
An active phone must be present.
Even if connected to the audio unit, your
phone can still be used in the usual way.
Note: You can exit the phone menu by
pressing any source button
CD
,
RADIO
or AUX .
Making a call
Dialling a number using voice
control
Phone numbers can be dialled using voice
control. See
Telephone commands
(page 166).
Dialling a number using the address
book
You can access your phone address
book via Bluetooth. The entries will appear
in the unit display.
1. Press the PHONE button.
2. Press the arrow buttons until the
phone book is shown.
3. Press the OK button
4. Press the up/down arrow buttons to
select the desired phone number.
Note: Press and hold the up/down arrow
buttons to skip to the next number.
5. Press the OK button to dial the
selected phone number.
Dialling a number using the
telephone keypad
If you have an audio unit with a telephone
keypad (buttons 0-9, * and #):
1. Press the PHONE button.
2. Dial the number using the telephone
keypad on the audio unit.
3. Press the OK button.
Note: If you enter an incorrect digit whilst
entering a phone number, press function
button 3 to erase the last digit. A long
press will erase the complete string of
digits.
Ending a call
Calls can be ended by pressing function
button 4.
155
(G1084240)
Telephone