Ford Ford Fiesta 2010, Owner'S Manual, Page: 144 / 192

2. Use the left and right arrow buttons to
tune down or up the waveband in
small increments or press and hold to
increment quickly, until you find a
station you want to listen to.
3. Press OK to continue listening to a
station.
Scan tuning
Scan allows you to listen to a few seconds
of each station detected.
Type 1
1. Press the MENU button.
2. Select RADIO mode and then SCAN.
3. Use the seek buttons to scan up or
down the selected waveband.
4. Press OK to continue listening to a
station.
Type 2
1. Press function button 3.
2. Use the seek buttons to scan up or
down the selected waveband.
3. Press function button 3 again or OK
to continue listening to a station.
STATION PRESET BUTTONS
(G1085415)
This feature allows you to store your
favourite stations so that they can be
recalled by selecting the appropriate
waveband and pressing one of the preset
buttons.
1. Select a waveband.
2. Tune to the station required.
3. Press and hold one of the preset
buttons. A progress bar and message
will appear. When the progress bar
completes the station has been
stored. The audio unit will also mute
momentarily as confirmation.
This can be repeated on each waveband
and for each preset button.
Whilst in radio mode, stored stations can
also be selected by pressing the arrow
up, down, right or OK buttons. Then scroll
to the desired preset station and press
OK.
Note: When you drive to another part of
the country, FM stations that broadcast
on alternative frequencies, and are stored
on preset buttons, may be updated with
the correct frequency for that area.
AUTOSTORE CONTROL
(G1337100)
Note: This will store up to a maximum of
the 10 strongest signals available, either
from the AM or the FM waveband, and
overwrite the previously stored stations.
It can also be used to store stations
manually in the same way as other
wavebands.
• Press and hold function button 1 or
the RADIO button.
• When the search is complete, sound
is restored and the strongest signals
are stored on the Autostore presets.
TRAFFIC INFORMATION
CONTROL
(G1337102)
Many stations that broadcast on the FM
waveband have a TP code to signify that
they carry traffic programme information.
142
(G1085415)
Audio unit operation