-35-
Wipers and washers
Reverse gear wipe
The rear wiper will be activated
automatically when selecting reverse
gear if:
The rear wiper is not already
•
switched on,
The wiper lever is in position
•
A
,
B
,
C
or
D
and
The front wiper is operating (when
•
set to position
B
).
The rear wiper will follow the front wiper
interval (at intermittent or normal speed).
Rear window washer
WARNING
Do not operate the washer for
more than 10 seconds at a time,
and never when the reservoir is empty.
While the lever is pulled towards the
steering wheel the washer will work in
conjunction with the wipers.
Once the wash/wipe cycle is completed,
the wipers will pause and then perform
one more wipe to clear the windscreen.
After releasing the lever, the wipers
operate for a short time.
E71018
ADJUSTING THE
WINDSCREEN WASHER
JETS
The eye ball jets can be adjusted
precisely using a pin.
CHECKING THE WIPER
BLADES
Run the tip of your fingers over the edge
of the blade to check for roughness.
Clean the wiper blade lips with water
applied with a soft sponge.
E73425
E66644
Summary of Contents for FOCUS LV
