STARTING THE ELECTRIC
MOTOR
Keyless Starting
Note:
The keyless starting system may not
function if the key is close to metal objects
or electronic devices such as cellular
phones.
Note:
A valid key must be located inside
your vehicle to switch the ignition on and
start the vehicle.
Note:
When locking your vehicle, any
remote controls left inside your vehicle may
disable. A message may appear in the
information display indicating that there is
no key detected when you try to start your
vehicle. Press the unlock button on the
remote control to enable it, and then start
your vehicle.
Ignition Modes
The keyless starting system has three
modes:
•
Off:
Turns the ignition off. Without
applying the brake pedal, press and
release the power button once when
the ignition is in the on mode, or when
the vehicle is on but not moving.
•
On:
All electrical circuits are
operational and the warning lamps and
indicators illuminate. Without applying
the brake pedal, press and release the
power button once from off mode.
•
Start:
Starts the vehicle. Press the
brake pedal, and then press the power
button for a couple of seconds. The
green ready to drive indicator lamp
appears in the instrument cluster when
your vehicle is ready to drive.
Starting Your Vehicle
Before starting your vehicle check the
following:
•
Make sure all the occupants have
fastened their safety belts.
•
Make sure the headlamps and
electrical accessories are off.
•
Make sure the parking brake is on.
•
Move the transmission selector lever
to position
P
.
Note:
Do not touch the accelerator pedal.
1.
Fully depress the brake pedal.
2. Press the power button.
Note:
You will not hear any engine noise.
The system does not function if:
•
The key frequencies are jammed.
•
The key battery has no charge.
If you are unable to start your vehicle, do
the following:
19
Focus Electric (CB8) Vehicles Built From: 13-07-2012, Vehicles Built Up To: 31-12-2013, Battery Electric Vehicle (BEV)
Starting and Stopping the Electric Motor
