PRINCIPLE OF OPERATION
Cruise control lets you maintain a set
speed without keeping your foot on the
accelerator pedal. You can use cruise
control when your vehicle speed is greater
than 20 mph (30 km/h).
USING CRUISE CONTROL
WARNING:
Do not use cruise
control on winding roads, in heavy traffic
or when the road surface is slippery. This
could result in loss of vehicle control,
serious injury or death.
WARNING:
When you are going
downhill, your vehicle speed could
increase above the set speed. The
system does not apply the brakes.
E102679
The cruise controls are on the steering
wheel.
Note:
Cruise control will disengage if your
vehicle speed decreases more than 10 mph
(16 km/h) below your set speed while
driving uphill.
Switching Cruise Control On
Press and release
ON
.
Setting the Cruise Speed
1.
Drive to desired speed.
2. Press and release
SET+
.
3. Take your foot off the accelerator
pedal.
E71340
The indicator displays in the
instrument cluster.
Changing the Set Speed
•
Press and release
SET+
or
SET-
to
change the set speed in small
increments.
•
Press the accelerator or brake pedal
until you reach the desired speed. Press
and release
SET+
.
•
Press and hold
SET+
or
SET-
. Release
the control when you reach the desired
speed.
Canceling the Set Speed
Press and release
CAN
, or tap the brake
pedal. The indicator no longer displays in
the instrument cluster. The set speed will
not be erased.
Note:
For vehicles with manual
transmission, depressing the clutch pedal
will also cancel the set speed.
Resuming the Set Speed
Press and release
RES
. The indicator
displays in the instrument cluster.
Switching Cruise Control Off
Press and release
OFF
when the system is
in stand by mode or switch the ignition off.
Note:
You erase the set speed when you
switch the system off.
146
2019 Fiesta (CCT) Canada/United States of America, KE8J 19A321 AA enUSA, Edition date: 201806, Second-Printing
Cruise Control
(If Equipped)
Summary of Contents for Fiesta 2019
Page 3: ......
