Ford F181-60, Instruction Manual

Page: 10 / 13

F181-60
EN
Copyright © 2015
P a g e | 9
www.Ford-tools.com
8.3.1 Switch lock
ƒ
The ON/OFF switch trigger (7) can be locked if the reverse switch (3) is in the
center position. (Fig. 5)
ƒ
This helps to reduce the possibility of accidental starting when not in use.
8.3.2 Direction of rotation (Fig. 5)
ƒ
To select forward rotation, release the on/off switch trigger (7) and push the
reverse switch (3) to left side of the tool.
ƒ
To select reverse rotation, push the reverse switch (3) to right side of the tool.
ƒ
When the reverse switch (3) is in center position, the ON/OFF switch trigger
(7) is locked.
8.3.3 Variable speed
This tool has a variable speed ON/OFF switch trigger (7) that delivers higher
speed and torque with increased trigger pressure.
Speed is controlled by the amount of pressure on the ON/OFF switch trigger (7).
9 CLEANING AND MAINTENANCE
Attention ! - Before performing any work on the equipment, pull
the power plug.
9.1 Cleaning
ƒ
Keep the ventilation slots of the machine clean to prevent overheating of the
engine.
ƒ
Regularly clean the machine housing with a soft cloth, preferably after each
use.
ƒ
Keep the ventilation slots free from dust and dirt.
ƒ
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc.
These solvents may damage the plastic parts.
10 TECHNICAL DETAILS
MODEL NR. F181-60
Rated voltage (direct current) 18V
Rotation speed 0-2300 min-1
Impact rate 0-3000 min-1
Charging time +/-1 hour
Battery type 1500mAh Li-Ion
Charger rated voltage 230V
Charger frequency 50Hz
Socket type ¼”
Max. torque 80Nm