When the lighting control is in the
autolamps position, you can switch on the
following in the information display:
•
Configurable daytime running lamps.
•
Automatic high beam control.
•
Adaptive headlamp control.
The headlamps remain on for a period of
time after you switch the ignition off. Use
the information display controls to adjust
the period of time that the headlamps
remain on.
Note:
If you switch on the autolamps, you
cannot switch the high beam headlamps
on until the autolamps system turns the low
beam headlamps on.
Windshield Wiper Activated
Headlamps
Note:
If you switch autolamps and
autowipers on, the headlamps
automatically turn on when the windshield
wipers continuously operate.
When you switch the autolamps on, the
windshield wiper activated headlamps turn
on within 10 seconds of switching on the
wipers. They turn off approximately 60
seconds after you switch the windshield
wipers off.
The headlamps do not turn on with the
wipers:
•
During a single wipe.
•
When you use the windshield washer.
•
If the wipers are in intermittent mode.
INSTRUMENT LIGHTING
DIMMER
E231828
DAYTIME RUNNING LAMPS
(If
Equipped)
WARNING
The daytime running lamps system
does not activate the rear lamps and
may not provide adequate lighting
during low visibility driving conditions. Also,
the autolamps switch position may not
activate the headlamps in all low visibility
conditions, such as daytime fog. Make sure
the headlamps are switched to auto or on,
as appropriate, during all low visibility
conditions. Failure to do so may result in a
crash.
88
F-150 (TFC) Canada/United States of America, enUSA, Edition date: 201607, Second Printing
Lighting
Summary of Contents for F-150
Page 3: ......