Ford EVEREST 2015, Owner'S Manual

Page: 268 / 437

Specification Recommended fluid Part
WSS-M2C938-A (XT-10
QLV)
Motorcraft MERCON® LV Transfer case oil
WSH-M17B19-A R134A Air conditioning refrigerant
WSH-M1C231-B POLYALKYLENE GLYCOL Air conditioning Compressor
lubricant
*
For markets with low sulphur content (less than 350 ppm)
**
For markets with high sulphur content (more than 350 ppm)
Your engine has been designed to be used
with Ford Engine Oil, which gives a fuel
economy benefit whilst maintaining the
durability of your engine.
Topping up the oil:
Engine oil - Diesel (for markets with
low sulphur content less than 350
ppm):
If you are unable to find an oil that
meets the specification defined in the
vehicle fluids table, you must use
SAE
5W-30 that meets the specification
defined by ACEA A5/B5 .
Engine oil - Diesel (for markets with
high sulphur content greater than 350
ppm):
If you are unable to find an oil that
meets the specification defined in the
vehicle fluids table, you must use
SAE
10W-30 that meets the specification
defined by API CH-4 .
Using topping up oils other than the one
specified can result in longer engine
cranking periods, reduced engine
performance, reduced fuel economy and
increased emission levels.
Capacities
Capacity Item Variant
5.2 L Engine oil with filter 2.0 Ecoboost
- Engine oil without filter 2.0 Ecoboost
8.6 L Engine oil with filter 2.2L Duratorq-TDCi
- Engine oil without filter 2.2L Duratorq-TDCi
9.75 L Engine oil with filter 3.2L Duratorq-TDCi
- Engine oil without filter 3.2L Duratorq-TDCi
Between the MIN line
and the MAX line
Clutch fluid Manual transmission
2.7 L Manual transmission oil Manual transmission
10.5 L Automatic transmission oil Automatic transmission (dry)
266
Everest (TEC), EB3B-19G219-YAA enAUS
Capacities and Specifications