Black plate (59,1)
Keyless Entry System
This system remotely locks and unlocks
the doors.
Operating the theft-deterrent system with
the keyless entry system transmitter is
also possible on theft-deterrent system-
equipped vehicles.
Press the buttons slowly and carefully.
CAUTION
To avoid damage to the transmitter, do
not:
l
Drop the transmitter.
l
Get the transmitter wet.
l
Disassemble the transmitter.
l
Expose the transmitter to any kind of
magnetic field.
l
Expose the transmitter to high
temperatures on places such as the
instrument panel or bonnet, under
direct sunlight.
NOTE
l
The keyless entry system is designed
to operate up to 1 m (3 ft) from
around the cabin, but this may vary
due to local conditions.
l
The system does not operate when
the ignition switch is in the ON
position.
l
Doors cannot be locked by pressing
the lock button while any other door
is open. Also, the hazard warning
lights will not flash.
l
If the transmitter does not operate
when pressing a button or the
operation range becomes too small,
the battery may be dead. To install a
new battery, refer to Maintenance
(page 3-4).
l
Additional transmitters can be
obtained at an Authorised Ford
Repairer. Up to 3 transmitters can be
used with the keyless entry system
per vehicle. Bring all transmitters to
an Authorised Ford Repairer when
additional transmitters are required.
Knowing Your Ford
Doors and Locks
3-3
EVEREST_F8M7-10-09B_Edition1 Page59
Tuesday, February 10 2009 12:54 AM
Form No.F8M7-10-09B