Follow these guidelines when using snow tires and traction devices:
•
SAE class “S” cables should ONLY be used on the front axle for
P235/70R16 tires. With P225/75R15 and P215/70R16 tires, SAE class
“S” cables can be used on both the front and rear wheels.
•
Install cables or chains securely, verifying that the cables or chains do
not touch any wiring, brake lines or fuel lines.
•
Drive cautiously. If you hear the cables or chains rub or bang against
the vehicle, stop and retighten them. If this does not work, remove the
cables or chains to prevent vehicle damage.
•
Avoid overloading your vehicle.
•
Remove the cables or chains when they are no longer needed.
•
Do not use cables or chains on dry roads.
•
Do not exceed 30 mph (48 km/h) with tire cables or chains on your
vehicle.
Consult your dealer for information on other Ford approved methods of
traction control.
VEHICLE LOADING – WITH AND WITHOUT A TRAILER
This section will guide you in the proper loading of your vehicle and/or
trailer, to keep your loaded vehicle weight within its design rating
capability, with or without a trailer. Properly loading your vehicle will
provide maximum return of vehicle design performance. Before loading
your vehicle, familiarize yourself with the following terms for determining
your vehicle’s weight ratings, with or without a trailer, from the vehicle’s
Safety Certification Label and Tire Label:
Base Curb Weight
– is the weight of the vehicle including a full tank of
fuel and all standard equipment. It does not include passengers, cargo, or
optional equipment.
Vehicle Curb Weight
– is the weight of your new vehicle when you
picked it up from your dealer plus any aftermarket equipment.
2005 Escape
(204)
Owners Guide (post-2002-fmt)
USA_English
(fus)
Tires, Wheels and Loading
172
