Krystal Enterprises
31
Back-Up Camera Controls and Operation
Back-Up Camera
(located on rear of vehicle)
This system consists of two major components:
1. The Back-Up Camera 2. LCD Monitor
The system may be connected two ways:
1.
Fully manual
, requiring the power button on
the LCD Monitor to be pushed to energize the
system and activate the monitor.
2.
Automatic
, which activates the monitor when-
ever the ignition is turned to accessory or the
engine is started.
System Operation
SEE MANUFACTURERS LITERATURE
FOR ADDITIONAL INFORMATION
1.
Power Button
, glows dimly when system is connected fully manual, be-
coming bright upon activation
2.
A/B input Select Button
, toggles active display between AV1 and AV2
inputs
3.
Day/Night Mode Button
, toggles intensity of LCD screen for day or night
operation, (day=maximum intensity, night=less intensity)
4.
Picture Adjustment Menu Button
, accesses on-screen-display, to adjust
(brightness, contrast, color, tint). Use the Volume control to adjust each up or
down, as indicate by a bar graph at bottom on screen.
5.
Volume Button
, co- output volume of built-in speaker, when feature
is connected. Also used in Picture Adjustment Mode.
Monitor Controls
LCD Monitor
(located in bulkhead above passenger seat on E-450
or in dash area on passenger side of F-550)
1
2
3
4
5
NOTE:
To reverse image
on monitor, push
button on back of
camera
Summary of Contents for Econline Super Duty Chassis 450 1998 Series
Page 2: ...ProCarManuals com ...
Page 39: ...Krystal Enterprises 39 THIS PAGE IS INTENTIONALLY BLANK ProCarManuals com RETURN TO MENU ...
Page 95: ...Krystal Enterprises 95 95 THIS PAGE IS INTENTIONALLY BLANK ProCarManuals com RETURN TO MENU ...
Page 107: ...Krystal Enterprises 107 107 F 550 Shuttle Bus Wiring Diagram ProCarManuals com RETURN TO MENU ...