4. Operate the fuel pump nozzle within
the area shown.
5. Raise the fuel pump nozzle slightly and
slowly remove it.
HINTS ON DRIVING WITH ANTI-
LOCK BRAKES
Note:
When the system is operating, the
brake pedal will pulse and may travel further.
Maintain pressure on the brake pedal. You
may also hear a noise from the system. This
is normal.
The anti-lock braking system will not
eliminate the risks when:
•
you drive too closely to the vehicle in
front of you
•
your vehicle is hydroplaning
•
you take corners too fast
•
the road surface is poor.
HILL START ASSIST
The system makes it easier for you to pull
away when your vehicle is on a slope
without the need to use the parking brake.
When the system is active, your vehicle will
remain stationary on the slope for two to
three seconds after you release the brake
pedal. This allows you time to move your
foot from the brake pedal to the accelerator
pedal. The brakes are released
automatically once the engine has
developed sufficient drive to prevent your
vehicle from rolling down the slope.
Using Hill Start Assist
1.
Press the brake pedal to bring your
vehicle to a complete standstill and
keep your foot on the brake pedal.
Note:
Your vehicle will remain on the slope
without rolling away for approximately two
to three seconds.
2. Move your foot from the brake to the
accelerator pedal.
3. Drive off in the normal manner.
USING CRUISE CONTROL
Switching Cruise Control On
Setting a Speed
Press to store and maintain your current
speed. The cruise control indicator will
illuminate.
11
Tourneo Courier (C4A) Vehicles Built From: 01-01-2014, Vehicles Built Up To: 31-01-2014, M1 Kombi/N1 Kombi, ET7J-19G217-AKA (CG3608en) enGBR, Edition date: 01/2014