High Beams
Pull the lever toward you to switch
between high beam and low beam.
Headlamp Flasher
Pull the lever toward you slightly and
release it to flash the headlamps.
AUTOLAMPS
WARNING
In severe weather conditions, it may
be necessary to switch your
headlamps on manually.
Note:
If you have switched autolamps on,
you can only switch the high beam on when
autolamps has switched the headlamps on.
The headlamps will come on and go off
automatically depending on the ambient
light.
INSTRUMENT LIGHTING
DIMMER
Press it repeatedly or press it and hold it
until the desired level is reached.
Note:
If you disconnect the battery or it
loses charge the instrument lighting will
return to its brightest setting.
HEADLAMP EXIT DELAY
Switch the ignition off and pull the
direction indicator lever toward you to
switch the headlamps on. A short tone will
sound. They will automatically turn off
after three minutes or 30 seconds after the
last door is closed.
Opening any door within 30 seconds after
closing all the doors will result in three
minute timer starting again.
Switch the ignition on or pull the direction
indicator lever towards you again to switch
the headlamp exit delay off.
44
Ranger (TKE) Vehicles Built From: 01-10-2014, DB39120609AD (CG3575en) enGBR, Edition date: 09/2014, First Printing
Lighting