Ford 2013 EXPLORER Page 258 Owner'S Manual Download

Page: 258 / 586

PRINCIPLES OF OPERATION

Cruise control lets you maintain a set speed without keeping your foot
on the accelerator pedal.

USING CRUISE CONTROL

WARNING:

Do not use cruise control in heavy traffic or on

roads that are winding, slippery or unpaved.

Note:

Vehicle speed may vary momentarily when driving up or down a

steep hill. Apply the brakes if your vehicle speed increases above the set
speed while driving downhill.

Note:

Cruise control will disengage if your vehicle speed decreases more

than 10 mph (16 km/h) below your set speed while driving uphill.

The cruise controls are located on
the steering wheel.

Switching Cruise Control On

Press the

control up and release.

The indicator will appear in the instrument cluster.

Setting a Speed

1. Accelerate to the desired speed.

2. Press the

SET

control upward and release.

3. Take your foot off the accelerator pedal.

The indicator will change colors in the instrument cluster.

Cruise Control

257

2013 Explorer

(exp)

Owners Guide gf, 4th Printing, November 2012
USA

(fus)

Summary of Contents for 2013 EXPLORER











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 EXPLORER

Reviews:

Related manuals for 2013 EXPLORER

Brands by name

Popular brands

Ford 2013 EXPLORER, Owner'S Manual

Search results

Summary of Contents for 2013 EXPLORER

Reviews:

Related manuals for 2013 EXPLORER

Brands by name

Popular brands